I didn??t know the advantages of rail process ahead of. I even think it useless for DSLR. That is definitely due to the fact I've by no means tried to accept it till when I saw this method. This really is a Metal multi-functional Standard Rail System that may be utilised for mounting HD DSLRs and various accessories like Comply with focus and matte box.
You are able to know a lot more particulars by reading the following points:
1. This Rail System could be adjusted each side to side and back and forth. There are two camera height riser adapters help the plate.
2. This rail system also has built-in Lens Help which is really beneficial accessory to help any lens.
The plate comes with both 1/4" and 3/8" camera mounting screws. Hence the large selection of cameras may be utilized with this Rail Program.
three. The Tripod Mounting plate may also be adjusted at any location on the rails.
four. Thickness of height riser adapters: 8mm; Lens support length: 65mm;
five. These height riser assists in adjusting the height from the camera as necessary.
6. Tripod mounting plate length : 80mm; Tripod mounting plate thickness : 20mm; Screws thread : 1/4 & 3/8
7. Rails length: 250mm; Rails dia: 15mm; Rails center-to-center distance : 60mm; Camera height riser adapters length : 85mm;
Except for the instruction, I also found three customers feelings after using the system:
Mindbend said:
??The whole thing feels quite sturdy. No cheap plastic bits like some other cheap off-brand products. Incredibly simple construction, exactly what I want out of a rail process. One small complaint, the adjustable lens help doesn't quite reach my 18-135mm kit lens. It's a lightweight, cheap lens though, so it's not a problem. This can be probably the best rail process you'll find for this price.??
Media Lab said:
??Similar looking to the RedRock program with all the bells and whistles. smooth quick release plate... solid aluminum build, same as any other manufacturer... weighs 1lb 8 onces... great for the price, this really is a perfect application for any DSLR setup. the base plate is mount is reversible for bigger cameras and the lens support is different from the picture. the one i got was better with rubber wheel grips instead a metal concave plate. you'll be able to spend 260 on the redrock or 150 for this one. theyre each made from aluminum, it should be a no brainer...??
Zachary Griffin Plumb said :
??This can be my first rail set, so I don't have anything to compare it to, but I expected lower quality since extra expensive options are out there. Seems well built, solid metal, etc. Definitely recommended for the price. Not sure how the a lot more expensive versions could be much better.??
没有评论:
发表评论