The factors I wrote about this DSLR shoulder rig usually are not only the superior quality but also the affordable cost for much less than $200. So there is certainly no wonder that the Opteka CXS-2 Dual-Grip Video Shoulder rigs system is high ratio of performance and value.
Then have a look at the Product:
Constructed of an really high quality aluminum and stainless steel material, the shoulder support method is designed to accommodate modest digital SLR cameras, all of the way as much as prosumer camcorders. Pretty much all adjustments are created utilizing thumbscrews, and may be further tightened with a wrench for added self-confidence. The camera, and shoulder pad can all be adjusted to fit your body (suitable or left shoulder) and shooting style. Essentially just about every element of the Opteka Video Shoulder Assistance System is adjustable to align and balance your rig. The CXS-2 Opteka Video Shoulder Support Process will enable any filmmaker to achieve expert outcomes.
Some distinctive styles: Dual-handle design reduces rotation, Heavy-duty aluminum construction, Lowers fatigue even though reducing vibration and shaking, Customizable with the CBW-1 counterbalance weight and CXSB-1 strap (sold separately) and Incorporates 15mm rails for mounting accessories. Compatible Accessories (Could need mount): LCD Monitor, Video Light, Microphone, FollowFocus, CBW-1 Counterbalance weight, CXSB-1 Strap system
Dimensions (LxHxD): 21 x 14 x 7" (53 x 35.five x 17.eight cm)
Weight: four.eight lbs (2.17kg)
One of the most beneficial evaluations about the shoulder rig:
I do suggest investing inside a viewfinder. It is possible to find one particular on-line for about beneath $100 dollars. The components they use are quite good aluminum or metal. It doesn't really feel low-cost. The shoulder pad is quite comfortable for extended video shooting. I honestly dont have something unfavorable to say regarding the product. I guess so far so good.
The EX-1 was fine since the screw acted because the guide pin. Other issue was the extension arms that flare out towards the side for any monitor, and so on. It really is only hand tightened using a round knob and it under no circumstances actually gets absolutely tight. I had to hand tighten it at an angle that I did not want, then pull it fully tight to exactly where I did want it. Not a massive issue, but if someone was working with it that did not know that, it would very easily come loose and who knows what could happen.
Tried it out having a 5D using a 70-300 zoom I had, and also put an EX-1 on it too. Had to raise the mount all of the way up the shoulder pad as the EX-1's rear was hitting it, but that was fine. Could nonetheless see the viewfinder nicely and it wasn't uncomfortable. I also had the weight on it which really actually aids. For a low-priced price tag it was a big plus, so I recommend getting one particular of those. I am a bigger guy so when I had it all assembled, it literally sat on my shoulder with great balance, though for smaller people, I would place a thick towel or something over your shoulder after which the rig, only to wrap tighter about your shoulder and back area, although you may not want that. Only other key difficulties I had was the guide screw rather than a pin on major of your platform, but I guess it is good that it really is a screw for the reason that you'll be able to take it out. With it in, the DSLR bodies rested on it and kinda kinked it upwards a hair.
没有评论:
发表评论